Free Shipping on orders over $40 !Shop Now

Languages

Shopping Cart

  • No products in the cart.

Canbus Decoder for Headlights (for newer modern cars) CANM8

Original price was: $94.99.Current price is: $47.50.

Accessories needed when connecting additional lights on modern cars with e.g. LED and Xenon auxiliary lights. CanM8 is a Canbus decoder for connecting additional lights....

Categories:
  • Secure Payment Processing
  • Fast & Reliable Delivery
  • Easy Returns & Exchange

Accessories needed when connecting additional lights on modern cars with e.g. LED and Xenon auxiliary lights.

CanM8 is a Canbus decoder for connecting additional lights. The decoder is a necessary accessory when installing auxiliary lights for modern and newly manufactured cars equipped with LED or xenon lights, which are controlled by Canbus high beam systems. The Canbus decoder converts the Canbus digital signal into an analogue 12V signal, so the connected relay kit can communicate between the auxiliary light and the car. In this way, the relay turns on the retrofitted auxiliary lights at the same time as you turn on the existing high beams. The Can decoder thus does not work alone, but requires a “normal” relay cable set as a partner.

A traditional relay wiring harness works the same way as a regular switch: On and off. The relay receives a signal (12V current) from the car’s high beam, and when the car’s high beam is turned on, this signal switches the relay to the “On” position and the auxiliary light turns on. When the car’s high beams are turned off and the signal disappears, the relay goes to the “Off” position, and the auxiliary lights are also turned off. In this way, the relay turns on the auxiliary light at the same time as the car’s own high beams.

Nowadays, in new cars, above all, LED and xenon lights are controlled more and more via Canbus systems. In this case, the 12V current required by the traditional relay wiring harness, from which the analog signal is read, no longer goes in a circuit, but the on/off information goes digitally via the Canbus system. The Canbus decoder retrieves information from the Canbus system and automatically outputs an analog 12V signal, which in turn signals the auxiliary light relay to be switched to the “On” position. If the car’s main beam is powered by halogen lamps, the auxiliary light can be connected directly to the car with a traditional relay cable set without a Canbus decoder.

Note! You can buy either the Canbus decoder only, if the relay wiring kit is already available, OR you can buy a complete package that includes the Canbus decoder and relay wiring kit for 1-2 extra lights or 1-4 extra lights with Deutch DT-2 connectors.

Connecting the various cables of the Canbus decoder
Red thread > Connect via a 5A fuse to a fixed 12V power source (+).
BLACK thread > Connect to fixed Earth / minus source (-).
WHITE thread > CAN HI connection : Connect to the Car’s CAN HI cable (canbus source).
BLUE thread > CAN LO connection : Connect to the Car’s CAN LO cable (canbus source).
PURPLE thread > High beam ignition Output signal: 12v (1A max) When the high beam is switched on, current is sent out on the cable. Connects to a relay harness.
Connection and troubleshooting
Flashing Red: Searching for CAN information.
Solid Red: CAN information received with car model not

Add a Review

Your email address will not be published. Required fields are marked *

Related Products