Door communication flush-mounted switching actuator

Features

• Flush-mounted switching actuator for controlling an external gong or other device via the Gira door communication bus.
• Control of a zero-voltage switching contact (24VSELV/ 50A to 1.6AAC/DC) via the 2-wire bus.
• The flush-mounted switching actuator can be controlled via:
  the buttons “Door” and “Light” on the home station,
  the floor-call button of the home station,
  the call button on the door station, the call button on the home station,
  a zero-voltage button(in conjunction with the 2-gang door communication button interface).
• The flush-mounted switching actuator can be used in four different operating modes: switching, timer/sec., timer/min., and pulse.
• Impulse function for controlling existing automatic staircase mechanisms.
• Switching time can be adjusted continuously from 1 to 10s or 1 to 10min., depending on the function set.
• LED display for programming, function selection, and time setting.

Technical data

• Power supply: via the 2-wire bus
• Zero-voltage relay contact: 50A to 1.6A at AC/DC24VSELV
• Number of call buttons that can be taught in: max. 16
• Ambient temperature: -5 C to +50 C

Notes

• The flush-mounted switching actuator is intended for installation in a deep device box (60mm deep) behind a door communication bus coupler.

Dimensions in mm