Free Shipping on orders over $40 !Shop Now

Languages

Shopping Cart

  • No products in the cart.

E4 board with built-in Wi-Fi and Bluetooth 4 pcs TMC2209 240MHz 16M flash 3D printer control board based for 3D printer

Original price was: $28.80.Current price is: $23.04.

Product Introduction The E4 board is a minimal 3D printer control board based on the ESP32 microcontroller from ESPRESSIF, with built-in Wi-Fi and Bluetooth. The...

Categories:
  • Secure Payment Processing
  • Fast & Reliable Delivery
  • Easy Returns & Exchange

Product Introduction

The E4 board is a minimal 3D printer control board based on the ESP32 microcontroller from ESPRESSIF, with built-in Wi-Fi and Bluetooth. The controller speed is up to 240MHz, 16M flash.

Features

  • Compact size: 90mm x 67mm
  • Native Wi-Fi support
  • 12V to 24V input power supply, 3 power outputs and 3 5V outputs
  • 4 TMC2209 stepper drives: X, Y, Z and E axis – Onboard TF card socket
  • CH340 for high speed USB serial connection – X, Y, and Z min endstops; also supports sensorless homing
  • Allows the use of a Z-axis probe, such as an inductive sensor, running on the input supply voltage (12V to 24V) or 5V
  • A controllable fan, you can choose the power supply voltage (12/24V) or 5V voltage for it
  • Xh2.54 connector, firm and easy to plug
  • PCB – Black matte ink,lead-free tin spray process
  • High quality, High temperature FR4-TG130 PCB

Why do you need this board?

If you want to be able to control your 3D printer via a web browser without having to buy extra components like a Raspberry Pi for Octoprint, this board is for you. If you run a printing farm and want to be able to start prints remotely via Wi-Fi, this board is for you.

Native Wi-Fi support

FYSETC E4 is based on the ESP32 microcontroller, so the E4 supports 802.11 b/g/n protocols, and a custom fork of Marlin firmware can be used on the board to allow the board to be controlled via a web browser. This removes the need for the traditional LCD controllers that most other boards use. There is also no need to connect a Raspberry Pi in order to control the printer via a web interface. The web interface is the popular ESP3D webUI, which runs natively on the custom Marlin fork. The printer can then be controlled via any web browser, be it a PC, smart phone, or tablet. For example, you can slice your 3D model using a slicing software on your PC, then use your PCs web browser to connect to the printer, send the sliced GCODE file to the printer via Wi-Fi. Then, using the same web browser, you can tell the printer to start printing away.

Trinamic stepper drivers

FYSETC E4 use the latest ,best stepper drvier : TMC2209. 1. Ultra quiet 2. Good heat dissipation 3. Max current up to 2A 4. Large heat sink,good heat dissipation 5. Support sensorless-homing function.

High voltage for probes

One common problem when using inductive or capactive probes is the voltage which they are powered at. These probes are usually connected to the Z endstop, which is powered directly by the microcontroller. This means 5V or 3.3V, but these probes are not designed for such low voltages. Instead, they are usually designed for operation at 6V or more. Using a lower voltage to operate such probes reduces their detection distance, and therefore their effectiveness.

The FYSETC E4 has a dedicated connector for such a Z

Add a Review

Your email address will not be published. Required fields are marked *

Related Products