MOFAGE Talos Damping Magic Arm

The MOFAGE Talos magic arm is an 11-inch articulating support arm with three locking joints, damping friction, and 1/4-inch mounting points for camera accessories. Black, silver, and beige variants share the same quick-adjust design for monitors, wireless units, compact lights, and other supported equipment.

Product Overview

Talos uses a central locking control to secure both ball heads and the middle joint while retaining friction for controlled repositioning before the arm is fully tightened. The two ends use 1/4-inch screws with anti-twist locating pins, and a 1/4-inch to 3/8-inch bushing expands the mounting choices. The listed maximum payload is 5kg in the supported configuration, but real capacity depends on arm angle, mounting orientation, and the security of the connected rig points.

Key Features

Damped Three-Joint Adjustment

Friction helps hold the current angle during repositioning, while the centre control locks the two ball heads and middle joint together.

Anti-Twist Mounting Points

Both ends use 1/4-inch screws with locating pins to reduce accessory rotation on compatible ARRI-style mounting holes.

Five-Kilogram Maximum Payload

The published maximum load is 5kg, with practical capacity affected by extension, orientation, leverage, and the strength of the mounting surface.

How It Compares

Choose Talos when controlled repositioning matters more than the simplest low-cost arm. A shorter arm reduces leverage in compact cages, while a dedicated monitor mount may be better when the accessory never needs a wide adjustment range.

Compatible Accessories and Related Gear

Use it with a compatible camera cage, monitor, wireless transmitter, compact light, clamp, or support point. Check thread size, anti-twist hole spacing, payload, leverage, and clearance before mounting.

Who Is This For?

This arm suits camera operators, DIT carts, studio rigs, rental kits, and location crews that regularly reposition monitors or accessories while keeping a single central locking control.

Who Should Choose Something Else?

Choose a shorter arm for very compact rigs, a baby-pin or grip-head solution for heavier lighting equipment, or a fixed monitor mount when maximum rigidity is more important than articulation.

In the Box

• 1 x MOFAGE Talos Damping Magic Arm
• 1 x 1/4-inch to 3/8-inch adapter bushing

Specifications

• Maximum length: 11in / 28cm
• Maximum listed payload: 11lb / 5kg
• Mounts: 1/4-inch screws with anti-twist pins at both ends
• Points of articulation: three
• Current colours: black, silver, or beige

FAQ

What is the Talos magic arm designed to do?
MOFAGE Talos Damping Magic Arm is designed for articulating a monitor or other supported camera accessory from compatible 1/4-i