System 3000 Universal LED dimmer DRA

Features

• Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps.
• Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps.
• Operation is via mechanical button (NO contact), System 3000 2- or 3-wire auxiliary unit or System 2000 2-wire auxiliary unit.
• Automatic or manual setting of dimming principle according to load (leading or trailing edge).
• Display of the selected operating mode using LED.
• Bulb-saving switch-on.
• Switch-on brightness can be saved permanently (possible with System 2000 and 3000 auxiliary unit).
• Switch on with the last brightness set, or a saved switch-on brightness.
• Minimum brightness can be set.
• Electronic short-circuit protection.
• Electronic excess-temperature protection.
• Operation with neutral conductor connection.

Technical data

• Rated voltage: AC 230V, 50/60Hz
• Standby: 0.3W
• Connected load at 45 C
• HV LED lamps (leading edge): typ. 3 to 100W
• HV LED lamps (trailing edge): typically 3 to 400W
• Compact fluorescent lamp: typ. 3 to 100W
• Light bulbs: 20 to 420W
• HV halogen lamps: 20 to 420W
• Gira tronic transformers: 20 to 420W
• Electronic transformer with LV LED (leading edge): typically 20 to 100W
• Electronic transformer with LV LED (trailing edge): typically 20 to 200W
• Wound transformer: 20 to 420VA
• Wound transformer with NV-LED: typically 20 to 100VA
• Auxiliary inputs
• Non-illuminated mechanical buttons: unlimited
• Auxiliary insert, 2-wire: unlimited
• Auxiliary insert, 3-wire: max. 10
• Cable length
• Load: max. 100m
• Auxiliary unit: max. 100m
• Ambient temperature: -5C to +45C

Notes

• If the ambient temperature is higher than 45C, the connected load must be reduced.

Dimensions